• Login
  • 0
    Cart

Memory Foam Pressure Relief Mattress

$226 $216

Absorbing green tea extract and ActivCharcoal so you wake up smelling less like sleep and more like fresh.

General Details

6″ Pressure Relief Green Tea Memory Foam Mattress

Core Composition: 1in Memory Foam + 5in High-Density Base Support Foam

Fabric: Knitted Jacquard

Dimensions and Weight:

Twin 39″ X 75″ X 6“, 18.9lb

Full 54″ X 75″ X 6“, 25.7lb

Queen 60″ X 80″ X 6“, 30.3lb

King 76″ X 80″ X 6″, 38.0lb

8″ Pressure Relief Green Tea Memory Foam Mattress

Core Composition: 2in Memory Foam + 2 inch Pressure Relief High Density Foam + 4 inch High Density Base Support Foam

Fabric: Knitted Jacquard

Dimensions and Weight:

Twin 39″ X 75″ X 8“, 27.2lb

Full 54″ X 75″ X 8“, 36.7lb

Queen 60″ X 80″ X 8“, 43.6lb

King 76″ X 80″ X 8″, 54.8lb

10″ Pressure Relief Green Tea Memory Foam Mattress

Core Composition: 2.5in Memory Foam + 2 inch Pressure Relief High Density Foam + 5.5 High Density Base Support Foam

Fabric: Knitted Jacquard

Dimensions and Weight:

Twin 39″ X 75″ X 10“, 33.4lb

Full 54″ X 75″ X 10“, 45.8lb

Queen 60″ X 80″ X 10“, 53.9lb

King 76″ X 80″ X 10″, 67.0lb

12″ Pressure Relief Green Tea Memory Foam Mattress

Core Composition: 3in Memory Foam + 2in Pressure Relief High Density Foam + 3.5 High-Density Foam + 3.5 High-Density Base Support Foam

Fabric: Knitted Jacquard

Dimensions and Weight:

Twin 39″ X 75″ X 12“, 39.3lb

Full 54″ X 75″ X 12“, 53.4lb

Queen 60″ X 80″ X 12“, 62.5lb

King 76″ X 80″ X 12″, 79.4lb

Cal King 72″ X 84″ X 12″, 78.8lb

Specifications
1. Hash Rate: 14 TH/s ±5%
2. Power Consumption: 1372W + 10% (at the wall, with APW3 ,93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 J/GH + 10%(at the wall, with APW3 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 189x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fan Front fan: 6000 rpm, Rear fan: 4300 rpm
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10.Frequency: Automatically set
Notes

Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU: A power supply unit is not included. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!

We recommend the APW3++-1600 power supply for use with the Antminer S9. One power supply supports one Antminer S9.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.

Antminer S9 controller

This Antminer S9 is not only the first 16nm miner for retailuse but using less than half the energy per gigahash of the S7, but it is also our most powerful miner to enter mass production . At 0.098 joules per gigahash, this is the most efficient machine available to the bitcoin mining public.

Comments

Leave a Reply

电子邮件地址不会被公开。 必填项已用*标注